Do you understand the operating knowledge of Burner MOCO? Let's take a look at it briefly!
1. For the newly installed furnace body, carefully check whether the gas meets Burner MOCO's requirements before commissioning; check whether the detection equipment on the gas supply pipeline is normal and whether the pipeline valves are opened and closed normally, and whether it is convenient for future use and maintenance.
2. For newly installed pipelines, carefully check the installation reliability of all pipelines and the tightness of the pipelines.
3. Users who use a separate gasification station must ensure that the gas supply volume and gas supply parameters meet the requirements for safe combustion.
4. The operator carefully reads the equipment instruction manual, and is proficient in the knowledge and methods of safe operation.
5. Check whether the gas valve is open every time before starting up, otherwise Burner MOCO will not work.
6. Start the power control button on the control cabinet, and the digital display will display the current temperature in the furnace. The temperature of the newly installed furnace body is the ambient temperature.
7. Start the fan control button, and the fan installed on the furnace body will work. At this time, if the fan is damaged, the control cabinet will be automatically protected from entering the next operation.
8. When there is no abnormal phenomenon in the operation of the combustion-supporting fan, restart the combustion control button. At this time, the combustion program controller starts to work. It performs ignition, air supply, flame detection, and other programs through a certain program to finally achieve safe combustion.
9. When the combustion controller receives a signal that is not conducive to combustion, the combustion controller immediately turns off the gas and sends out an alarm signal.
The above is a brief introduction to the operating knowledge of Burner MOCO.