Write down the product name or number you want and click OK to get the result
X
Sure
language
中国
韩国
韩国
韩国
韩国
韩国
|
|
|
Burner MOCO introduction: the knowledge of starting operation of the burner!

Burner MOCO introduction: the knowledge of starting operation of the burner!

  • Categories:Industry news
  • Author:
  • Origin:
  • Time of issue:2021-09-18 14:04
  • Views:

(Summary description)For the newly installed furnace body, carefully check whether the gas meets the requirements of the burner before commissioning; check whether the detection instrument on the gas supply pipeline is normal and whether the pipeline valve is opened and closed properly, and whether it is convenient for future use and maintenance.

Burner MOCO introduction: the knowledge of starting operation of the burner!

(Summary description)For the newly installed furnace body, carefully check whether the gas meets the requirements of the burner before commissioning; check whether the detection instrument on the gas supply pipeline is normal and whether the pipeline valve is opened and closed properly, and whether it is convenient for future use and maintenance.

  • Categories:Industry news
  • Author:
  • Origin:
  • Time of issue:2021-09-18 14:04
  • Views:
Information

Do you know how to operate the burner? Follow the editor of Burner MOCO to have a simple understanding!
1. For the newly installed furnace body, carefully check whether the gas meets the requirements of the burner before debugging; check whether the detection instrument on the gas supply pipeline is normal and whether the pipeline valve is open and closed normally, and whether it is convenient for future use and maintenance.
2. For newly installed pipelines, carefully check the installation reliability of all pipelines and the tightness of the pipelines.
3. Users who use a separate gasification station must ensure that the gas supply volume and gas supply parameters meet the requirements for safe combustion.
4. The operator carefully reads the equipment instruction manual, and is proficient in the knowledge and methods of safe operation.
5. Check whether the gas valve is open every time before starting up, otherwise the burner will not work.
6. Start the power control button on the control cabinet, and the digital display will display the current temperature in the furnace. The temperature of the newly installed furnace body is the ambient temperature.
7. Start the fan control button, and the fan installed on the furnace body will work. At this time, if the fan is damaged, the control cabinet will be automatically protected from entering the next operation.
8. When there is no abnormality in the operation of the combustion-supporting fan, restart the combustion control button. At this time, the combustion program controller starts to work. It uses certain procedures to perform ignition, air supply, flame detection, and other procedures to achieve safe combustion.
9. When the combustion controller receives a signal that is not conducive to combustion (for example: ignition failure, unstable air pressure, circuit problems) and other problems, the combustion controller immediately turns off the gas and sends out an alarm signal.
10. If the combustion controller alarms, it needs to be manually reset by the operator after the fault is resolved before it can continue to work.
11. For the operation of the entire equipment, the operator should refer to the furnace safety operating procedures and production process requirements.
12. When the control temperature needs to be adjusted according to the requirements of the production process, the operator should refer to the instructions of the intelligent numerical control table for adjustment.
The above is the story of Burner MOCO editor: about the starting operation knowledge of the burner.

Keyword:

Enclosure

There is currently no content to display
Please add data record on website background.

Related news

There is currently no information to display
Please add data record on website background.
Leave us a message
Subscribe for updates

A weekly update of what’s on the Global Agenda

Username used for comment:
订阅
Description:

订阅

Follow us
MOCO
MOCO
MOCO
MOCO

Copyright © 2021 MOCO  All Rights Reserved.   浙ICP备2021015594号-1

Online consultation
-

Hotline

86-0574-88381835