Do you know what the maintenance specifications of customized ultrasonic washer manufacturers are? Let's take a look at it briefly!
1. The power supply is AC 380v.
2. First connect the signal line between the ultrasonic power supply and the cleaning tank.
3. Add liquid into the cleaning tank, the height is about 300mm. When the liquid in the liquid storage tank reaches half the height of the liquid storage tank, the temperature is 40-55 degrees.
4. Put the workpiece to be cleaned into the cleaning tank, and try not to directly touch the bottom of the workpiece. Do not hit the side wall of the cleaning tank.
5. Set the working time of the ultrasound (note that the time cannot be zero), press the start button of the ultrasound, and the ultrasound will start to work.
6. The cleaning time is determined by itself according to the degree of oil contamination of the workpiece.
7. Please close the filter outlet valve when the circulating filter is closed.
8. Regularly clean the sludge at the bottom of the cleaning tank.
9. If the equipment is not used for a long time (7 days) in summer, the liquid in the cleaning tank should be drained, and in winter, it should be ensured that there is no ice in the tank.
10. If there is a lot of dust in the workshop, compressed air should be used to clean the dust in the power distribution cabinet every month.
In summary, the knowledge about the maintenance specifications of customized ultrasonic washer manufacturers.