Write down the product name or number you want and click OK to get the result
X
Sure
language
中国
韩国
韩国
韩国
韩国
韩国
|
|
|
Burner MOCO introduction: the technical operation knowledge of the burner!

Burner MOCO introduction: the technical operation knowledge of the burner!

  • Categories:Industry news
  • Author:
  • Origin:
  • Time of issue:2021-09-13 16:24
  • Views:

(Summary description)Press the main fire start button on the combustion control panel. After the main fire work indicator lights up for 10 seconds, confirm that the main fire is ignited. If the main fire indicator goes out within 10 seconds, the combustion fault alarm buzzer on the combustion control panel will sound, indicating that the ignition has failed; after 60 seconds, manually press the fault reset button of the programmer to restart the main fire button.

Burner MOCO introduction: the technical operation knowledge of the burner!

(Summary description)Press the main fire start button on the combustion control panel. After the main fire work indicator lights up for 10 seconds, confirm that the main fire is ignited. If the main fire indicator goes out within 10 seconds, the combustion fault alarm buzzer on the combustion control panel will sound, indicating that the ignition has failed; after 60 seconds, manually press the fault reset button of the programmer to restart the main fire button.

  • Categories:Industry news
  • Author:
  • Origin:
  • Time of issue:2021-09-13 16:24
  • Views:
Information

Do you understand the technical operation knowledge of the burner? Follow the editor of Burner MOCO to have a simple understanding!
1. Press the main fire start button on the combustion control panel. After the main fire work indicator lights up for 10 seconds, confirm that the main fire is ignited. If the main fire indicator goes out within 10 seconds, the combustion fault alarm buzzer on the combustion control panel will sound, indicating that the ignition has failed; after 60 seconds, manually press the fault reset button of the programmer to restart the main fire button.
2. After the main fire is ignited normally, the operator confirms whether the main fire is ignited through the observation hole of the burner. After confirming, press the high fire start button on the burner control panel. After a few seconds delay, after the high fire work indicator lights up, the operator in front of the furnace should slowly open the load regulating ball valve and increase the gas-supporting air proportionally until the flame shows the main Blue and reddish are best.
3. After the fire is ignited and stabilized, check whether the gas supply pressure of the main pipeline is within the normal range.
4. The fan starts and enters the pre-blowing stage. Check that the equipment is in a normal state.
5. Observe the gas and air pressure instructions, and confirm that the burner operation permission instructions are given.
6. Press the combustion control button on the combustion control panel, and the combustion controller enters the combustion start program at this time.
7. The task of firing the next open fire has been completed. The operator should turn off the main fire button on the panel in time, cut off the main fire and keep the fire burning.
8. The operator can adjust the size of the flame (load) at any time according to the process requirements during the burning process of the big fire. When the process requires that the fire be turned off for a short time, the operator should turn on the main fire switch to retain the main fire, and then turn off the high fire switch.
9. Adjust the gas valve and air valve operating handles, which can be adjusted in stages to ensure that the burner load output meets the process requirements.
10. Shutdown operation: For temporary shutdown, first turn off the fire, then turn off the combustion control switch, and then turn off the stop button.
The above is the introduction of Burner MOCO editor: introduction to the technical operation knowledge of the burner.

Keyword:

Enclosure

There is currently no content to display
Please add data record on website background.

Related news

There is currently no information to display
Please add data record on website background.
Leave us a message
Subscribe for updates

A weekly update of what’s on the Global Agenda

Username used for comment:
订阅
Description:

订阅

Follow us
MOCO
MOCO
MOCO
MOCO

Copyright © 2021 MOCO  All Rights Reserved.   浙ICP备2021015594号-1

Online consultation
-

Hotline

86-0574-88381835